Zeke is missing and to help find him….or be him we have Paul and Jarrad Markel on.
Podcast: Play in new window
| Download
Source Article from http://feedproxy.google.com/~r/TalkingLead/~3/dvj-aIn6IwE/
Zeke is missing and to help find him….or be him we have Paul and Jarrad Markel on.
Podcast: Play in new window
| Download
Source Article from http://feedproxy.google.com/~r/TalkingLead/~3/dvj-aIn6IwE/
Check out Shawn getting an in-depth look at the up and coming product.
Source Article from http://welikeshooting.com/reviews/gadgets/one-mag-8-calibers-learn-say-wow/
Source Article from http://welikeshooting.com/reviews/guns/cadex-defense/
Lefthand gets a chance to sit down with Jacob from Century Arms
http://www.talkinglead.com/?powerpress_pinw=1029-podcast
Source Article from http://feedproxy.google.com/~r/TalkingLead/~3/exYohf2kBZY/
Source Article from http://welikeshooting.com/interviews/affordable-4x-quality-optics-check-found/
A friend of mine decided she wanted a revolver for her growing collection, so off we went the Small Arms Review gun show at the Arizona State Fair Grounds to see what we could find.
We had our sights on a stainless steel, 4-inch revolover chambered in .357 magnum or .38 SPL, but for $350. After wandering aisles for hours, we found it. Perfect match. A .38 Special revolver, 4-inch barrel, Hogue grips, 2-pounds of polished stainless steel, and a double-action only trigger — the Smith & Wesson Model 64 for less than 300 bucks!
A quick inspection revealed that the gun was likely 30-years old and traveled a great deal in its time. Based on some of the markings — “MOD 64” and “NY-1” stamped on the cylinder yoke cut-out — put it with some 5,500 guns delivered to the New York City Police Department in the late 80s and early 90s.
And the markings and wear explain a lot about its life. In the 1980s a lot of police departments — the NYPD included — required officers to qualify with a firearm only once a year, so judging by the scuff marks and worn areas, it likely spent the rest of its life inside a holster.
Although it suffered a few cosmetic issues — worn grips and holster wear on the barrel and cylinder — the bore was bright and clean with hardly any wear and at $299, it was too good to pass up.
The bobbed hammer makes this a DAO revolver with a heavier trigger pull. Certainly manageable even for a woman with small hands, but could still be difficult. Changing the Power Rib Mainspring will help reduce pull weight and is fortunately a fairly minor bit of gunsmithing.
Chambered in .38 S&W Special, it’s good compromise between stopping power, recoil and cost. One thing to note, though, there is a .38 S&W cartridge and a .38 S&W Special cartridge, and they are not interchangeable.
Shooting the Model 64 is a joy because of the weight the recoil is easily manageable and as mentioned before the trigger is very heavy but it does not have any slack in it and has a nice clean break, with a little work it can be much better.
The sights on this revolver leave a lot to be desired with a groove on top of the receiver and fixed blade on the barrel making proper sight alignment difficult for me at distances over 15 feet, but at home defense distances they are fine.
The Smith & Wesson Model 64 is an excellent revolver for both new and experienced shooters. Iconic Smith & Wesson quality and lots of replacement parts available make it a great value. New models are still available with many of the same features, but for about double the price of a used model. The company lists MSRP as $689.
Source Article from http://www.guns.com/review/2015/02/10/gun-review-in-a-buyers-market-the-smith-wesson-64-reigns-supreme/
Thanks to “overwhelming” demand for a Saiga 12 adapter SilencerCo has added a new part to their catalog. Shotgunners who have been dreaming of a suppressed Saiga now have a slip-on option for use with the outstanding new Salvo 12.
SilencerCo is launching the new part with a cheeky bit of “found footage,” with an ad in the style of archived Soviet-era propaganda. It’s definitely worth watching.
The adapter is designed for Saiga and Vepr shotguns, which while current not being imported, are already Stateside in large numbers. If SilencerCo hadn’t decided to make this adapter, it would have only been a matter of time before a third party stepped in.
“Due to overwhelming interest, we now offer a Saiga 12 adapter for the Salvo 12 shotgun suppressor. Now easily suppress your Saiga or Vepr shotgun using our new adapter for the Salvo 12.”
“Utilizing existing choke tube threading, the Salvo 12 was introduced by SilencerCo in 2014 as the first, commercially-viable shotgun suppressor,” the company said in a press release. “It attaches to virtually any shotgun that will accept interchangeable choke tubes and successfully lowers the muzzle report to below hearing-safe levels.”
Priced at $120 the Saiga/Vepr adapter doesn’t run any more than existing threaded choke adapters and will probably retail in the $90 to $100 range.
We’ve said it before, the Salvo 12 is SilencerCo’s boldest product. The Salvo 12 is the first commercially-viable shotgun suppressor on the market and that’s no small achievement.
The Salvo 12 is completely modular and can be broken down by section, and re-configured with some or all of the baffles to assemble a short, light suppressor or a more noise-reducing, longer and heavier suppressor.
The rear cap is designed to attach onto threaded choke adapters, and SilencerCo makes adapters for Benelli, Browning, FN America, Mossberg Remington and Weatherby shotguns already.
The asymmetrical design hangs the baffle stack beneath the bore which lets shooters see over the can without having to raise or modify their sights.
Shooting a shotgun equipped with a a Salvo 12 is like being transported to a different world. The recoil mitigation is outstanding and the sound pressure level reduction is almost unbelievable. If you can only try one new thing the gun world has to offer this year, make it a Salvo 12 if possible.
The Salvo 12 has the potential to change how the public at large sees suppressors, not as scary or threatening but helpful and safe. And on a Saiga 12 it has got to be one of the most fun shooting experiences we could imagine.
Whether or not you though you might get into stamp collecting, if you have a Saiga or Vepr 12 it’s time to seriously re-think your future purchasing plans.
Source Article from http://www.guns.com/2015/02/09/silencerco-adds-saiga-12-adapter-for-salvo-12-video/
After suffering from deteriorating health problems for two years, Judge, a retired West Deptford Township, New Jersey, police dog, was walked into a Woolwich Township animal hospital to put a permanent end to his suffering this week.
Judge, who aided in 152 arrests, the seizure of three vehicles, confiscating three illegal handguns, multiple drug seizures and confiscation of more than $47,000 in cash, was diagnosed with Cushings Disease, which led to vomiting, hair loss and bloating. Eventually, medical professionals found multiple masses on Judge’s body and discovered there was little more that could be done for the dog.
Judge had become so weak, that his handlers were unsure if he would be able to make the walk to the hospital door, but with a training sleeve – his favorite toy – gripped tight in his mouth, Judge made the walk and was soon euthanized.
Source Article from http://www.guns.com/2015/02/24/officers-pay-respect-to-terminally-ill-k-9-as-he-enters-hospital-to-be-put-down/
Amongst the pain, suffering and anguish at Auschwitz, some 100 drawings were created by a Polish prisoner in spite of the dire consequences lurking if the drawings were discovered.
“The art was forbidden in Auschwitz so creating a drawing like that means risking torture, even death, however the art existed here almost from the beginning,” explained Agnieszka Sieradzka, art historian at the Auschwitz-Birkenau State Museum.
Franciszek Jaźwiecki drew the faces of his fellow prisoners, and although they varied in age and nationalities, Sieradzka pointed out a very stark similarity among them all.
“The most interesting in these portraits are eyes — a very strange helplessness,” she said, adding that the portraits were often created out of the individual desire for prisoners to have an image.
Sieradzka said she believes Jaźwiecki created the drawings because he knew the historical significance they would one day hold.
Jaźwiecki’s more than 100 portraits are part of a gallery at the Auschwitz-Birkenau museum which features over 2,ooo pieces of art created in Nazi concentration camps.
[CNN]
Source Article from http://www.guns.com/2015/02/24/drawings-by-polish-prisoner-in-auschwitz-10-pics/
Correct stance can make a big difference in recoil control and speed. Not to mention, it’s the easiest way to look like you know what you’re doing.
Stance may be the least important fundamental of pistol marksmanship since real life may call for you to shoot from a seated, prone, kneeling, squatting, or….you get the picture. That being said, when firing from that standing, facing the target position you’re probably familiar with, a solid stance can enhance accuracy past the first “bang” in multiple-shot sequences.
The advice in this article applies to “isosceles” stance, in which the shooter stands with hips and shoulders squared to the target. In the” Weaver” position, the “support” (non-shooting hand) side of the body is bladed away from the target — and there are grip differences, but that’s beyond the scope of the matter here.
Most modern law enforcement agencies have, over time, adopted the isosceles stance as it is more naturally acquired and the fastest way to get sights onto the target. At least that’s my opinion after watching numerous students in classes where Weaver is the standard of instruction.
When a speed requirement is added, all but the staunchest Weaver-indoctrinated students consistently, and I believe subconsciously, switch to isosceles. There’s no doubt, THEY BOTH WORK.
However, that gun guru who still walks our earth, Jerry Miculek, has done a relatively scientific experiment that seems to put the debate to rest on which stance is faster to acquire. It’s covered in a video he made on revolver shooting. Keep in mind that Miculek’s first rise to shooting stardom was achieved when practically everyone used Weaver.
Now that I’ve lost the readers who dislike isosceles, let’s get on to what this is really about: recoil control, comfort and greater speed through posture, specifically the vertical axis of your body. Here are some guidelines (exceptions are covered after this review of the basics):
Some exceptions to the above may be that, during the path to becoming a better shooter, some may find recoil management more comfortable with the non-shooting side foot slightly forward of the other. Others may have injuries or arthritic joints that simply won’t comply with proper technique. If that applies to you, just make everything else as correct as possible.
Typical errors in stance I see, with most new shooters and for some reason virtually every new female shooter, are:
Leaning back. Often because they fear the noise or recoil that originates at the end of their arms, new shooters usually lean backward, shoulders-behind-hips. This accomplishes two unwanted ends: back strain and insufficient recoil control, as every round ratchets the shooter slightly even more backward.
When the lean is corrected and the shooter regains her orientation of leaning slightly toward the target from the hips, the next predictable error is to have…
Softened elbows. It’s as if the shooter is apologizing for taking a more aggressive stance toward the target, so she softens her elbow joints. The least of the inevitable undesirable result of this is poor recoil control. The worst is that she induces a malfunction by not providing adequate resistance to counter the action of the slide, where semi-automatics are concerned.
If you don’t understand that a semi-automatic is a gas-operated system that needs some tension, think of attempting to play a guitar on which the strings are loosely attached on one end. You might get one note or two, but soon that instrument won’t work. The shooter’s firm grip, locked wrist joints and firm elbows are essential to correct function of a semiauto. There I go, drifting into the topic of grip again, because it’s supported by stance.
To achieve proper stance in your own practice, imagine you’re trying to press the front sight right through the target, but your feet are anchored to the ground at the balls of your feet. Fire a shot, and then more, maintaining this posture before, during and after each shot.
Self-imposed perceptions of appearing too aggressive when leaning forward and pressing he front sight toward the target have no place in good practice. Dispose of those beliefs now if you have them.
There are always exceptions to rules. Shooters whose body mass is sufficient to absorb the recoil of their chosen handgun can often stand stock-straight and shoot accurately. The advice in this article will work for any shooter who is able to stand and shoot, regardless of body size. Keep in mind that, though you may feel awkward at first shooting in a leaning-forward position, your body is more mobile and able to respond quickly from this slightly forward stance.
A correct stance slightly coils the core of your body, making you more nimble and able to respond in a real criminal attack. Shooters who use stock-straight posture may find that, when picking up a larger caliber or higher-recoil weapon than the one they’re used to, their recoil management and ability to get multiple shots off quickly is diminished by the ratcheting action imposed on their lower back by recoil.
Although often met with feelings of awkwardness or skepticism, the shoulders-forward stance will serve you well regardless of the handgun you’re shooting, whether you’re familiar with the gun or not. It can protect your lower back from injury. And who can argue with the fact that you’ll look and shoot better as you match your mechanical structure to fit the function of your gun?
Source Article from http://www.guns.com/2015/02/24/stance-if-its-not-working-for-you-its-working-against-you/
Jerry Miculek shows us the proper revolver technique. A lot of this knowledge can also apply to semi-automatic pistols and handguns as well. He also shows us the differences between the weaver and isosceles techniques.
LEGOs may have a suggested age range of 8 to 12-years-old, but that shouldn’t stop any adult from playing with him, especially if you’re building big boy toys, like a submachine gun.
Brandon Allen has made a variety of both creative and totally cool creations out of the interlocking brick system (Check out his entire gallery here). Allen’s works of art include helicopters, Humvees and, of course, guns!
This Vector SMG made by Allen not only looks awesome, but is fully functioning as well – in this sense that all the parts move as they should. As if that’s not awe-inspiring enough, Allen breaks down the SMG, only to put it back together again.
Source Article from http://www.guns.com/2015/02/23/vector-smg-made-from-legos-video/
NBC4i: Columbus, Ohio News, Weather and Sports (WCMH-TV)
One man is dead after he broke into two homes in Columbus, Ohio, early Thursday morning.
Just before 5 a.m., the suspect, who was later identified as 28-year-old Christopher Lee Willis, broke into a home before being chased away by the homeowner. In an effort to escape, Willis broke a second-story window and jumped from the roof.
Willis then ran across the street to the home of Sharon Jessee, where he broke another window and attempted to get inside. Jessee, who was asleep on the couch and was awakened by sound of glass shattering, grabbed a gun and fired several shots, striking Willis.
A call was placed to 911 and the caller reportedly told the dispatcher, “She shot him. She shot him good.”
Willis was transported to the hospital, but died about two hours later.
Buck Jessee said he was concerned about his widowed mother being safe and bought her a gun for protection just last week.
“Just like this situation right here,” Buck told a local NBC affiliate. “That’s why I bought it.”
Jessee’s daughter, Robin Catalfina, said she can’t believe that her mother shot and killed someone, but she feels her mother acted appropriately.
“She’s been through a lot and she’s definitely not going to let someone go into her house and take what she’s got or harm her,” Catalfina said. “She will protect herself and she did.”
The case is still under investigation, but at this point, authorities do not expect any charges to be filed against Jessee, as it appears she acted in self-defense.
Investigators do not yet have a motive for the break-ins, but Sgt. David Sicilian, homicide squad supervisor with the Columbus Police Department, called Willis’ behavior “kind of bizarre.”
None of the residents in the neighborhood were acquainted with Willis.
According to The Columbus Dispatch, this was the second fatal defensive shooting in the city so far this year. In 2014, Columbus saw a total of five homicides which were deemed self-defense.
Source Article from http://www.guns.com/2015/02/23/widow-shoots-kills-intruder-a-week-after-getting-a-gun-for-self-defense-video/
With California’s unique new law in place that allows for gun confiscations from those thought at risk, a state lawmaker wants to make sure it’s not abused.
The law in question, which passed the state legislature as AB 1014 last year, provides a framework for the temporary seizure of guns from an individual at the request of their family or friends.
It was implemented following an attack in Isla Vista, California, that gun control advocates advised could have been prevented under the new procedure, which allows firearms to be confiscated for up to a year if an order is granted. However, Assemblymember Melissa Melendez, R-Lake Elsinore, is concerned that it is too easy to abuse.
“Law abiding gun owners should never have to fear their rights can be stripped away because an angry ex or neighbor wants to get even,” noted Melendez on the legislation in a post on social media.
Melendez’s solution is to temper the use of the new law by making it a felony to file false reports seeking gun violence restraining orders. Her bill, AB 225, was introduced Feb. 3. It would make filing a request for an order using knowingly false information felony perjury under state law, which would mandate a punishment of up to four years in prison.
California’s gun violence restraining order law was criticized during its legislative process by groups ranging from the National Rifle Association to the Liberal Gun Owners Association who criticized the low evidentiary standards and potential to dissuade troubled individuals from seeking medical treatment.
“The AB 1014 Gun Violence Restraining Order laws are nothing but a minefield for innocent Californians and actually incentivize abuse by anti-gun radicals,” Brandon Combs, president of the Firearms Policy Coalition told Guns.com via email. The FPC strongly supports AB 225, which they see as a first step to correcting “numerous terminal deficiencies” in the current law.
“Assembly member Melendez deserves credit for introducing language to protect law-abiding gun owners from harassment and the loss of their fundamental Constitutional rights,” Combs said. “We are cautiously optimistic that other members will follow her lead and work to correct AB 1014’s other unconstitutional and dangerous flaws.”
Since its adoption in California last year, similar measures were proposed in Virginia, New York, Washington State and in the U.S. House without gaining traction. However, U.S. Rep. Lois Capps, D-California, has resubmitted a federal bill with the support of Isla Vista victim survivors.
Melendez’s bill is set to be heard in committee March 6.
Source Article from http://www.guns.com/2015/02/09/lawmaker-pushes-to-make-filing-false-gun-violence-restraining-order-a-felony/
Bringing you a tasteful way to shoot a rubber band in a fellow sixth graders eye, Elastic Precision makes realistic wooden replicas of the gun world’s favorites. Depending on the model and finish, guns run from $20 to $80.
[ ElasticPrecision ]
Source Article from http://www.guns.com/2015/02/08/rubber-band-gun-warfare-done-right-6-pics/